Bangalore, Permanent Epoxy Floor Marking # Floor Marking # Permanent Marking

PERMANENT MARKING

Pack Size:

25 Kg

Epoxy Screed based permanent marking system , life up to 8 years

A solvent less Epoxy with silicon fillets for much mort abrasion resistant Marking for your heavy duty floors and commercial Parking areas. Marking can be stable till end of the floor life.

Typical Properties
	Maximum Operating Temperature, °C	:	90
	Mixing Ratio By volume, (R : H)	:	2 : 1
	Pot life at 30 °C , minutes	:	30
	Full cure at 30 °C , hours	:	4 - 5
	Coverage per coat per Ltr, Sq.mtr.	:	0.6
	Film thickness per 2 coats, microns	:	1200
	Volume of solids, %	:	100

Applications
	Control room Floorings
	Laboratory Floorings
	Hospital clean room Floorings
	Show room Floorings
	Computer room Floorings
	Bottling plant Floorings
	Electronics production floors
	Industrial Flooring
	Godown / Warehouse Floorings
	Garage / Car Parking Floors

Application Instructions :(Please read general instructions)

Surface Preparation : Undercut the marking area up to 0.5 to 1 mm . Clean the surface to remove any dust, unsound material, plaster, paint algae, oil etc

Mixing: Add entire contents (Resin + Hardener) of P-Marker and mix thoroughly for at least 3 minutes.

Application : Apply mixed materials with metal patti / scraper. level the surface by silicon roller, for reflection - sprinkle the glass beads evenly to form a complete single layered blanket 20 minuets after application of p- Marker . Use 900 GMS of glass beads per ltr of P-Marker Remove excess glass beads pneumatically.

#3, 1st Cross, Netaji Circle, Mathikere Ext. Bangalore - 560054, Email: unnathigroups@gmail.com, info@unnathi.com, unnathicare@gmail.com

Phone: 080 - 23604570 Mobile : +91 9986004163, +91 9845554959