|
ROAD KING
|
|
|
|
|
|
Pack Size |
|
|
|
|
A reflective paint which dries with in 15-20 min.
|
The Cold-Applied
Reflective Road Marking Paint available in standard shades of White and
Yellow is suitable to be applied over Bitumen/Cement Concrete roads as Road
Marking Paint.
The paint marking is retro-reflective and hence during night times, when the
headlight beam of a fast moving vehicle falls on the marking, the light is
reflected back to the driver due to a physical phenomenon called
Retro-reflection. This enables the driver of the vehicle to get alerted even
at a reasonable distance and to control the speed of the vehicle
comfortably.
|
|
It has been field tested
on the heavy traffic density roads of New Delhi and
found to meet the requirements of Road Marking Paints.
It may be cold applied on roads of Bitumen/Cement
Concrete to indicate traffic signals like Speed
Breakers, Pedestrian Crossings, Path Dividers and Other
similar markings. Unlike the Hot melt Thermoplastic Road
Marking paints, this has better adhesion over cement
concrete surfaces and requires no primer. |
|
|
Specification: |
-
Type: Single pack, Cold-Applicable, Air-drying
-
Composition : Non-saponifiable plasticised Polyblend medium with suitable
pigmentation
-
Color : White and Yellow
-
Flash Point : 20oC
-
Volume Solids : Appr. 50%
-
Recommended Dry Film Thickness : 200 Microns
-
Wet Film Thickness : 400 Microns
-
Coverage per Ltr : 2 Sq.mtr @ 200 micron DFT
-
Retro-Reflection : Medium Glass Beads * BS 6088-d
-
Shape : Spherical [Min.80%]
-
Size : 150-250 microns
-
Refractive Index : 1.5
-
No Pick-up Time [ASTM D 711-94] : 5-7 Minutes
-
Method of Application : By Brush and Spray Application
-
Thinner/Cleaner : IRS-20 [Use of any other solvents may damage the paint]
-
Storage Life : Twelve Months in original sealed container
-
Surface condition : Dry Surface free from Dust, Sand, Oils and Grease
-
Precautions/Limitations : Avoid application process when temperature falls below
10°C or rises above 50°C and when relative humidity rises above 90%. Do not
apply during rain, fog or mist.
|
|
|
Note : Surface application of 300 to 400 gms. /Sq.M is recommended for
maximum reflectivity and durability.
|
| |
